Arthroscopic hmanga enkawl a nih chuan a hnunglam ke ruh (posterior shoulder instability) a awm thei

Posterior shoulder instability hi exercise emaw thil dang tih laiin traumatic posterior dislocation emaw repetitive minimally invasive injury vang a ni tlangpui a, kum khatah mi 100000 zingah case 4.64 an awm thin. Posterior shoulder instability enkawlna atana surgical technique hrang hrang sawi a ni tawh a, chung zingah chuan soft tissue repair leh open leh arthroscopic bone block surgery te pawh a tel. Mahse, surgical complication report leh revision rates chu 14% leh 67% vel a ni. A bik takin, ruh grafts dik taka dah te, screw orientation te leh concomitant lesions enkawl te chu thil harsa takah ngaih a ni. Chuvangin surgical technique te hi tihchangtlun a ngai a ni.

Operation step hrang hrang: 1.1.

• Operation hi general anesthesia hmanga regional block of intermuscular sulcus nena inzawm hmanga tih a ni.

• Iliac crest lakkhawmna atan hian local anesthetics chu vun hnuai leh periosteally-in an hmang a.

• Damlo chu beach chair-ah dah a ni a, a hnungzang chu 45 ° angle-ah dah a ni a, chu chuan iliac crest nen a inzawm kim thei a ni. Ruh thlak an lak hnuah operation an chhunzawm leh a, damlo chu 70 ° angle-ah a thu a ni. Damlo chu standard sterile angin an suspend a, operating arm chu 2 to 3 kg traction rope hmangin 30 ° hmalam hawiin an ben a ni.

• 
  

Arthroscopic hmanga ruh inzawmna enfiah

• Hetiang kalphung hian luhna kawng hnih emaw pathum emaw a hmang thin. Front (E) luhna hmasa ber chu joint exploration uluk tak neih nan hman theih a ni.

  
  

• Range hi rotator interval hmangin joint-ah direct-in a luh theih a ni. A then phei chuan scope (chu chu rotator interval vel a scar tissue) direct-a luhtir theih a ni lo.

  
  

• Lateral C entrance emaw front lateral D entrance emaw i siam thei a, chutiang chuan acromion peak hnuaia space-ah i lut thei a, chutiang chuan rotator muscle space chu i enfiah thei ang.

  
  

• Rotator interval hawn nan hian arthroscopic radiofrequency ablation hman a ni.

  
  

• Toggle lever chu E entry kaltlangin joint chhungah dah a ni a, range chu joint interior view-ah a inthlak a ni.

  
  

• Joint hi uluk taka endik a nih hnuah soft tissue lesions leh a kaihhnawih glenoid leh humeral bone loss (ie, posterior glenoid lip, joint capsule, glenoid marginal lesion leh reverse Hill Sachs lesion) te chu endik a ni.

  
  

• Glenohumeral joint chu uluk taka arthroscopic evaluation leh indication dik tak finfiah hnuah bone grafts lak a ni.

  
  

Bone transplantation lakkhawm leh buatsaih dan

• Bicortical autograft hi ipsilateral anterior iliac crest atanga lak a ni a, chu chu pelvis chhungril cortex humhalh nan a ni. Skin incision chu anterior superior iliac spine hnunglam 2cm vel leh crest hnuai lam 2cm vel chu iliac crest zawhin siam la, chu chuan crest chu direct-a khuh thei scar siam a nih loh nan.

  
  

• Cortical bone α leh β enfiah hnuah Kirschner pin pahnih parallel chu lateral cortex chhungah hian hole kaltlangin dah a ni a, a hmain Arthroscopic Latarjet device atanga coracoid screw sei pahnih hmanga thuam a ni (Fig. 1).

  
  

• Guide handle chu chunglam hawiin a awm a, chutiang chuan bone graft chu posterior inferior glenoid neck nen anatomically matched a ni thei. Guide dahna hmunah hian upper ridge chu bone block articular side atan thlan theih a ni.

  
  

• Tichuan, Kirschner wire-a hollow coracoid process step drill chu nawr la, bone block-ah 2.9mm hole pahnih drill rawh. Drill bit leh Kirschner pin chu an la chhuak ta a. Top cap washer chu drill hole chhunga i dah hmain top cap tap hmangin hole chu tap hmasa phawt ang che.

  
  

• Top cap chu a hmunah a awm tawh chuan swing saw emaw bone knife emaw hmangin iliac crest medial cortex chu humhim la, 2-cm × 1-cm × 1-cm grafts te chu harvest rawh (Figure 2 leh 3). Graft an lakkhawm hnuah bone block chu coracoid process sleeve-ah an thlunzawm a, coracoid process screw sei tak hollow pahnih hmangin unit pakhat an siam a, chu chu a tawp ber thlengin manipulate theih a ni (Fig. 4).

  
  

• Iliac crest hliam chu layer khat hnu layer khatin drainage tube hmangin khar a ni a, dressing hman a ni. Tichuan operating table hnunglam chu 70 ° angle-ah siamrem rawh.

Figure 1. Damlo chu beach chair position-a a awm laiin right iliac crest bone an la khawm a. Kirschner needle pahnih hi double cannula guide device nen an dah dun a, cannula handle chu chunglam hawiin a awm bawk. (Ant, hmalam; DCG, double casing guide; Inf, hnuai lam Post, hnunglam; Sup, chunglam.)

Figure 2. Damlo chu beach chair position-a a awm chuan dinglam iliac crest bone block chu lak a ni. Iliac crest cortex lateral platform drill zawhah drill bit leh Kirschner wire chu la chhuak la, chutah chuan 'hats' 2 dah rawh. (Ant, hmalam; DCG, double casing guide; Inf, hnuai lam; Post, hnunglam; Sup, chunglam; TH, chunglam hat.)

Figure 3. Damlo chu beach chair position-a a awm chuan dinglam iliac crest-a bone block chu lak a ni. Graft an lakkhawm hnuah pawh iliac crest chhung lam chu a awm reng a ni. (Ant, hmalam; Inf, hnuai lam; IT, chhung lam dawhkan; Post, hnunglam; Sup, chunglam.)

Figure 4. Side table-ah ruh block siam rawh. Graft an lakkhawm hnuah bone graft chu cannula obturator pahnih hmangin double cannula-ah an connect a. (Ant, hmalam; DCG, double cannula kaihhruaina; IBG, iliac ruh thlak; Inf, hnuai lam; Post, hnunglam; Sup, chunglam.)

Hnung lam kawngpui chhinchhiahna leh luhna kawngpui te

• A tlangpuiin channel pahnih atanga pathum vel hman a ni. A tum ber chu posterior A inlet chu glenohumeral joint line nen a theih ang anga align a ni. Chuvangin arthroscope hmanga control a ni. Chuvangin, hmalam lateral inlet atanga operation hnuah tih a ni ber.

  
  

• Anterolateral entrance E hi biceps muscle chunga rotator muscle space-ah dah a ni a, chu chuan glenoid edge hnunglam chu a tilang chiang thei hle (Table 1).

  
  

• A tam zawkah chuan channel dang a ngai tawh lo; Mahse, a tul chuan rear cuff kaltlangin posterolateral B inlet dang hman theih a ni (entir nan, complementary labial prostheses enkawl nan).

  
  

• A tha ber chu Entrance A hi glenohumeral joint line axis-ah chiah a awm a ni.

  
  

• Entrance E hma leh hnung lam atanga thlir chuan spine needle 2 chu cm 2.5 atanga 3 inkar a hlaah hnunglam ah dah la, dar 7 leh dar 9 position-ah (right shoulder) joint chu parallel in dah rawh.

  
  

• Needle 2 inkarah vun incision siam la, rear A entrance atan hmang rawh (Figure 5A leh B).

Figure 5. (A) Damlo chuan vun incision chu 70 ° angle sitting position, right shoulder leh E entrance view-ah mark leh buatsaih tur a ni. Rear A inlet leh glenohumeral joint line inkara alignment tha ber neih theih nan spine needle pahnih hnunglam hawiin dahin vun incision chhinchhiahna hriat theih a ni.

(B) Arthroscopic visualization, a ke dinglam, leh electronic portal view hmanga damlo needle hmanga 70 ° sitting position-a a awm dan. (Ant, hmalam; DCG, double cannula kaihhruaina; Gl, glenoid; Inf, hnuai lam; Post, hnunglam; Pc, hnunglam capsule; Sn, spinal needle; Sup, chunglam.)

Glenoid buatsaih dan tur

• Instrument hi hnunglam (A) inlet kaltlangin a luhtir a ni.

  
  

• VAPR leh razor hmangin labrum leh posterior capsule chu 7 atanga 10 (right shoulder) thlengin la chhuak rawh (Fig. 6A leh B, Video 1).

  
  

• Posterior glenoid neck chu arthroscopic burrs hmangin grind la, thisen chhuak ruh chu a lang chhuak a, plane a inpeih thlengin grind rawh (Fig. 7). Glenoid neck a inpeih chuan posterior A inlet chu tihzauh a ni a, chu chuan graft leh double coracoid cannula te chu a paltlang thei a ni.

  
  

• Scalpel hmang hian taksa ruh inthen darh leh cystotomy tihzauh theih a ni a, blunt rectangular trocar (subscapular passage) hmang hian a kalna chu a tizau lehzual thei bawk (Figure 8).

Figure 6. (AB) Arthroscopy hnuaia glenoid buatsaih dan hmuh theih, damlo 70 ° angle-a thu, a ke dinglam, electronic entrance view. Glenoid siam lai hian VAPR leh razor hmangin glenoid lip leh posterior capsule chu dar 7:00 atanga 10:00 thlenga lak chhuah tur a ni. (Ant, hmalam; Gl, glenoid; Hh, humeral lu; Inf, hnuai lam; Pc, hnunglam capsule; Post, hnunglam; Sup, chunglam; V, VAPR.)

Figure 7. Glenoid buatsaih dan arthroscopic visualization: damlo chu angle 70 °-ah a thu a, a ke dinglam, E-portal view. Glenoid buatsaih laiin posterior glenoid neck a inbel thin. (Ant, hmalam; B, burr; Gl, glenoid; Inf, hnuai lam; Pgn, hnunglam glenoid kawr; Post, hnunglam; Sup, chunglam.)

Figure 8. Glenoid buatsaih dan arthroscopic visualization: damlo chu angle 70 °-ah a thu a, a ke dinglam, E-portal view. Rear A inlet chu trocar blunt hmangin ti lian rawh. (Ant, hmalam; Bt: blunt trocar; Gl, glenoid; Inf, hnuai lam; Pc, hnunglam capsule; Post, hnunglam; Sup, chunglam.)

Graft positioning leh fixation te a awm bawk

Graft chu hnunglam luhna kaltlangin a handle chu chunglam hawiin (Fig. 9) dahin, muscle leh joint capsule hmangin posterior glenoid kawr hnaih a, glenoid articular surface nena inmil thlengin an inthen a ni. He step hian splitting buatsaih dan tur ngaihtuah a ngai a, a bik takin infraspinatus fascia thick leh chak tak hawn leh graft kal tlang tur venna lam a ngaihtuah a ngai a ni.

• Fascia zau taka hawn nan scalpel blade hman a pawimawh. A tul chuan, operation hnuhnung zawkah chuan, flushing leakage chu a pawimawh lutuk a, a kekawrte chungah pressure tling tak a awm theih loh chuan, instruments hmangin surgery hliam chu a then chu khar theih a ni (entir nan, wound clips).

  
  

• Coracoid cannula hi articular surface nen parallel-in dah a ni a, chutiang chuan a hnu lama Kirschner wire leh screw te chu insertion laiin joint chhungah an lut lo.

  
  

• 1.5 mm sei Kirschner wire pahnih chu hollow coracoid process screw hmangin dahin graft chu posterior glenoid neck-ah fix turin an dah a (Fig. 10).

  
  

• Kirschner wire dahna hi 40mm aia tam lo tur a ni a, chu chuan anterior glenoid neck a paltlang loh nan, hei hian anterior neurovascular structure a tichhe thei a, mahse subscapularis muscle thenkhat chauh hi neck leh neurovascular structure inkarah hian a humhim thei a ni.

Figure 9. Damlo chuan graft chu 70 ° sitting position-ah a dah a, a ke dinglam leh posterolateral side a en a. Graft chu hnunglam luhna atang chuan a handle chu a chung lam hawiin dah a ni. (Ant, hmalam; DCG, double casing guide; Inf, hnuai lam; Post, hnunglam; Sup, chunglam.)

Figure 10. Graft positioning, damlo 70 ° angle-a thu, a ke dinglam, E entrance view-a arthroscopic visualization. Kirschner pin pahnih dah chuan posterior glenoid neck-a graft chu a stabilize a. (Ant, hmalam; Gl, glenoid; IBG, iliac bone graft; Inf, hnuai lam; Kw, Kirschner wire; Post, hnunglam; Sup, chunglam.)

30 ° arthroscope hi portal vein hmalam atanga thlir a nih avangin a pianphungah chuan graft chu angle-ah a tilt duh a, a hnuai lam chu a dinglam aiin a langsar zawk a ni. Graft dah hnuah pawh bone graft hi a la tih theih leh theih loh enfiah a pawimawh.

• Graft chu posterior glenoid margin nen a flush zawh chuan coracoid screw sei hmasa ber chu la chhuakin Kirschner wire-ah 3-2mm zau bicortical glenoid tunnel drill rawh.

  
  

• He step-ah hian practice hmasa ber hnuah pawh kan ding reng a pawimawh. Auxiliary personnel te chuan kut pahnih hmangin an enkawl tur a ni (Figure 11).

  
  

• Kirschner pin pathumna chu khur chhungah dah turin a inpeih a ngai a, a chhan chu a awmna hmuna Kirschner pin chu a duh loh zawngin drill bit-in motor-ah a man tlangpui a ni.

  
  

• Coracoid sleeve hmanga drill bit lak chhuah dawnin Kirschner wire hi lakchhuah loh nan fimkhur a ngai a ni. Tichuan, 4.5 mm partially threaded Latarjet screw chu Kirschner wire (Fig. 12) chhungah dah la, graft a inthlak loh nan a pumin dah la, chutah chuan upper screw chu drill rawh. A tha ber chu screw sei zawng hi 32 atanga 36 mm aia tam lo tur a ni.

  
  

• 40 mm aia sei zawng zawng chu uluk taka enfiah a ngai a, hei hi glenoid surface nena khaikhin chuan graft angle steep vang a ni thei a, chu chuan graft dislocation a thlen thei a ni. Hetiang dinhmunah hian graft positioning level chu glenoid chu lower screw vel ah rotate hmangin siamthat theih a la ni.

  
  

• Screw hmasa ber (hnuai zawk) i dah hnuah Kirschner pin hmasa ber chu lakchhuah theih a ni. Screw pahnihna pawh chutiang bawk chuan dah lut rawh.

  
  

• Screw 2 i dah hnuah Kirschner wire i lakchhuah hnuah Entrance A-a probe hmangin final graft position chu enfiah rawh (Figure 13). Graft atanga chhuak zawng zawng chu burrs hmanga trim tur a ni a, joint stiffness ven nan soft tissue repair tih loh tur a ni.

Figure 11. Graft chu dahin a nghet a. Damlo chu a ke dinglam chu chunglam atanga thlirin 70 ° angle-ah a thu a. Implant drilling neih lai leh zawh hnuah pawh K line-in tunnel a tihzauh loh nan guider chu kut pahnih hmangin a ding reng tur a ni. (Ant, hmalam; DCG, cannula pahnih kaihhruaina; Kw, Kirschner wire; Post, hnunglam; Sup, chunglam.)

Figure 12. Graft fixation arthroscopic visualization, damlo 70 ° angle-a thu, a ke dinglam, electronic entrance view. A hnuai lam 4.5mm partially threaded Latarjet screw chu Kirschner pin chungah dah hmasak a ni. (Ant, hmalam; Gl, glenoid; IBG, iliac bone graft; Inf, hnuai lam; S, screw; Post, hnunglam; Sup, chunglam.)

Figure 13. Graft positioning arthroscopic visualization, damlo 70 ° angle-a thu, a ke dinglam, E entrance view. Screw pahnih i dah hnuah Kirschner wire i lakchhuah hnuah final transplant position chu enfiah rawh. Hetiang bone graft hian compressibility tha tak a nei a, proud position a nei lo. (Ant, hmalam; Gl, glenoid; Hh, humeral lu; IBG, iliac bone graft; Inf, hnuai lam; Post, hnunglam; Sup, chunglam.)

Operation hnuah chuan shoulder chu 20 ° abduction angle leh neutral rotation hmangin kar 6 chhung an fix a:

• Operation zawh a tuk zingah passive shoulder, elbow leh hand range of motion exercise tan tur a ni. Pronation leh chet na tak tak te hi pumpelh tur a ni.

  
  

• Kar 3 hnuah active range of motion exercise tan tur a ni.

  
  

• Operation atanga kar 6 hnuah graft stability a finfiah hnuah intensive exercise tan theih a ni.

  
  

• Infiammi dam chak duh tan chuan graft integration tehna atan operation hnu thla 3 hnuah computerized tomography tih a ngai a ni.

  
  

Orthopaedic Implant leh Orthopaedic Instruments lei dan tur!

Tan CZMEDITECH , kan nei a, orthopaedic surgery implant leh a kaihhnawih instruments product line kimchang tak kan nei a, a product te pawh a tel spine implant te pawh a awm, intramedullary nail a awm bawk, trauma plate a ni, locking plate a ni, lu (cranial-maxillofacial) a ni, prosthesis hmanga siam a ni, power hmanrua hmanga siam a ni, pawn lam atanga fixator te, arthroscopy hmanga enfiah a ni, ran enkawlna leh an puitu instrument set te.

Chu bakah, doctor leh damlo tam zawkte surgical mamawh phuhrukna tur leh, khawvel pum huapa orthopedic implants leh instruments industry pumpuiah kan company hi inelna nei zawka siam theih nan, product thar siam chhunzawm zel leh product line tihpun zel kan tum a ni.

Khawvel pumah kan export a, chuvang chuan i ti thei ang email address song@orthopedic-china.com ah min rawn biak theih a, free quote i dawng thei a, WhatsApp ah message thawn la, chhanna rang tak +86- 18112515727 .

Thu belhchian dawl zawk hriat duh chuan,click rawh CZMEDITECH hian a chipchiar zawkin a zawt thei ang.