Proximal Medial Tibial Locking Plate

What is Proximal Medial Tibial Locking Plate ？

The 3.5 mm LCP Medial Proximal Tibia Plate is part of the CZMEDITECH Small Fragment LCP System that merges locking screw technology with conventional plating techniques.

The 3.5 mm LCP Medial Proximal Tibia Plate is available in stainless steel and has a limited-contact shaft profile. The head and neck portions of the plate accept 3.5 mm Locking Screws and 3.5 mm Conical Screws. The screw hole pattern allows a raft of subchondral locking screws to buttress and maintain reduction of the articular surface. This provides fixed-angle support to the tibial plateau.

The locking compression plate (LCP) has Combi holes in the plate shaft that combine a dynamic compression unit (DCU) hole with a locking screw hole. The Combi hole provides the flexibility of axial compression and locking capability throughout the length of the plate shaft.

Available in left and right plates, in implant quality 316L stainless steel.

Plate head

• Anatomically contoured to approximate the anteromedial proximal tibia.

• Three convergent threaded screw holes accept 3.5 mm Locking Screws or 3.5 mm Conical Screws.

• Two 2.0 mm holes for preliminary fixation with K-wires, or meniscal repair with sutures.

Plate shaft

• The two angled locking holes distal to the plate head accept 3.5 mm Locking Screws or 3.5 mm Conical Screws, to secure the plate position.The hole angles allow the locking screws to converge with two of the three screws in the plate head.

• Combi holes, distal to the angled locking holes, combine a DCU hole with a threaded locking hole. The Combi holes accept 3.5 mm Locking Screws or 3.5 mm Conical Screws in the threaded portion of the hole and 3.5 mm Cortex Screws or 3.5 mm Shaft Screws in the DCU portion of the hole.

• Available with 4, 6, 8, 10, or 12 Combi holes in the plate shaft.

• Limited-contact profile.

specifications

Proximal Medial Tibial Locking Plate: A Comprehensive Guide

If you have a fractured tibia, you may need surgery to fix it. In many cases, doctors will use a proximal medial tibial locking plate to stabilize the bone during the healing process. This guide will explain what this type of plate is, how it works, and what to expect if you need one.

What is a proximal medial tibial locking plate?

A proximal medial tibial locking plate is a metal plate that is surgically attached to the tibia bone just below the knee joint. It has multiple holes that allow screws to be inserted to secure the plate to the bone. The plate is designed to provide stability to the bone as it heals.

How does a proximal medial tibial locking plate work?

The locking plate works by providing support to the fractured bone, helping to keep it in place as it heals. The plate is attached to the bone using screws, which hold it in place. The locking feature of the plate ensures that the screws will not back out of the bone, which can happen with non-locking plates.

When is a proximal medial tibial locking plate used?

A proximal medial tibial locking plate is used to treat fractures of the tibia bone just below the knee joint. This type of fracture can be caused by trauma, such as a car accident or fall, or by a stress fracture from overuse.

What are the advantages of using a proximal medial tibial locking plate?

One advantage of using a proximal medial tibial locking plate is that it provides stable fixation of the bone, which can help reduce pain and improve healing time. The locking feature of the plate also reduces the risk of screw back-out, which can occur with non-locking plates.

What are the risks of using a proximal medial tibial locking plate?

As with any surgery, there are risks involved with using a proximal medial tibial locking plate. Some potential risks include infection, bleeding, and nerve damage. There is also a risk of the plate or screws breaking or loosening over time.

How is a proximal medial tibial locking plate inserted?

The surgery to insert a proximal medial tibial locking plate is usually done under general anesthesia. An incision is made on the front of the leg, just below the knee joint. The plate is then positioned on the bone and held in place with screws. X-rays are used during the surgery to ensure that the plate is in the correct position.

What is the recovery process like?

The recovery process can vary depending on the severity of the fracture and the patient's overall health. Most patients will need to use crutches for several weeks after surgery, and physical therapy may be necessary to regain strength and mobility in the leg. It can take several months for the bone to fully heal.

How long will the plate need to stay in place?

The length of time that the plate needs to stay in place can vary depending on the severity of the fracture and how quickly the bone is healing. In some cases, the plate may need to stay in place permanently. In other cases, it may be removed once the bone has fully healed.

What are some tips for recovering from surgery?

Some tips for recovering from surgery include following your doctor's instructions closely, taking pain medication as prescribed, and getting plenty of rest. It is also important to eat a healthy diet and stay hydrated to help promote healing.

Can a proximal medial tibial locking plate be used in combination with other treatments?

Yes, a proximal medial tibial locking plate can be used in combination with other treatments such as bone grafting or the use of a cast or bracing. Your doctor will determine the best course of treatment for your specific injury.

What are some potential complications after surgery?

Some potential complications after surgery include infection, bleeding, and nerve damage. There is also a risk of the plate or screws breaking or loosening over time. It is important to closely follow your doctor's instructions for post-operative care to help minimize the risk of complications.

Conclusion

A proximal medial tibial locking plate is a useful tool for stabilizing fractures of the tibia bone just below the knee joint. While there are some risks involved with the surgery, the benefits of stable fixation and reduced risk of screw back-out can make it a good choice for many patients. If you need this type of surgery, be sure to closely follow your doctor's instructions for pre- and post-operative care.