Plate features a awm bawk

– Proximal radius-a fracture pattern hrang hrangte ngaihtuah turin LCP Proximal Radius Plate 9 a awm

– Plate te hi anatomical fit atan precontoured an ni

– Combi holes hian threaded section-a locking screw hmanga fixation a phalsak a, chu chu angular stability atan a ni a, Dynamic Compression Unit (DCU) section-a cortex screw hmangin distraction a awm bawk. Fixed-angle construct hian osteopenic bone emaw multifragment fracture emaw-ah hlawkna a pe a, chutah chuan traditional screw lei chu a tichhe thei a ni.

– Ruh natna (osteoporotic bone) a awm chuan uluk takin hnawih thin ang che

Thil dang pawh a awm bawk

– Limited-contact design shaft ah hian combi-hole 2, 3, leh 4 a awm

– Plate lu chhunga khur te hian 2.4 mm locking screw an pawm a

– Shaft holes hian threaded portion-ah 2.4 mm locking screw emaw, distraction portion-ah 2.7 mm cortex screw leh 2.4 mm cortex screw emaw an pawm a ni

– Radial head rim atana plate dinglam leh veilam plate-a awm, radial head anatomy nena inmil tur 5o tilt nei

– Radial head neck atana plate te hi proximal radius veilam leh dinglam pahnih ah a fit vek

specification hrang hrang a awm

Thil siam chhuah te	REF	A sawifiahna	Thickness a ni	Vang	Dung
Proximal Radius Locking Plate (2.4 Locking Screw/2.4 Cortical Screw hmang rawh)	5100-1401 thleng a ni	3 holes a awm L	1.8	8.7	53
	5100-1402 thleng a ni	4 holes a awm L	1.8	8.7	63
	5100-1403 thleng a ni	5 a awm L	1.8	8.7	72
	5100-1404 thleng a ni	3 a awm R	1.8	8.7	53
	5100-1405 thleng a ni	4 a awm R	1.8	8.7	63
	5100-1406 thleng a ni	5 a awm R	1.8	8.7	72

Proximal Radius Locking Plate: A tlangpuiin a awm

Proximal radius-a fracture enkawlna tur a nih chuan locking plate hi solution tha tak a ni. Locking plate hman tlanglawn ber pakhat chu proximal radius locking plate (PRLP) a ni. He thuziak ah hian PRLP chungchanga hriat tur zawng zawng kan chhui dawn a, chung zingah chuan an taksa peng hrang hrang, an indication, surgical technique, leh an harsatna awm thei te pawh a tel ang.

Proximal Radius Locking Plate-a taksa peng hrang hrangte

PRLP hi plate chi khat a ni a, proximal radius-a fracture enkawlna atana hman thin a ni. Precontoured metal plate a ni a, proximal radius lateral aspect-ah a innghat a ni. Plate hi ruh pianzia ang zela siam a ni a, ruh chhunga lock lut tur screw dahna tur khur a awm a, chu chuan a nghet thei ang.

Proximal Radius Locking Plate chi hrang hrang

PRLP chi hrang hrang a awm a, chungte chu:

• PRLP dik tak a ni

• Contoured PRLP a ni

• Prebent PRLP a ni

PRLP hman tur thlan dan tur chu fracture pattern bik, damlo taksa peng hrang hrang, leh surgeon duh danah a innghat ang.

Proximal Radius Locking Plate hman dan tur hriattirna

PRLPs hi proximal radius-a fracture enkawlna atan hman a ni ber. Proximal radius-a fracture hi trauma avanga lo awm thei, kut phar chunga tlu emaw, pathological condition, osteoporosis ang chi emaw avanga lo awm thei a ni. PRLP hman dan tur hriattirna te chu:

• Non-displaced emaw minimal displaced emaw fracture a awm

• Displaced fractures te chu a awm

• Ligament hliam nena inzawm fractures

• Comminuted fractures a awm bawk

• Osteoporosis emaw ruh quality tha lo emaw nei damlote zingah ruh tliak (fracture) a awm

Proximal Radius Locking Plate siamna atana surgical Technique hman dan tur

PRLP atana surgical technique hian step engemaw zat a huam a:

1. Damlo dinhmun: Damlo chu operation table-ah dah a ni a, a tlangpuiin supine position-ah a kut chu hand table-ah dah a ni.

2. Incision: Proximal radius lateral aspect-ah incision siamin fracture hmun chu a lang chhuak thin.

3. Reduction: Fracture hi closed reduction technique emaw open reduction technique emaw hmangin tihtlem a ni.

4. Plate dah dan: Chumi hnuah PRLP chu proximal radius lateral aspect-ah dahin screw hmangin a hmunah fixed a ni.

5. Closure: Incision chu khar a, dressing hnawih a ni.

Proximal Radius Locking Plate avanga harsatna awm thei te

Surgical procedure dang ang bawkin PRLP hman hian harsatna a awm thei a ni. Chung zingah chuan:

• Kaichhawng

• Union ni lo emaw, union tihkhawtlai emaw

• Hardware a chhiat avangin

• Nerve emaw vascular emaw hliam

• Implant prominence emaw irritation emaw a awm

Dam lehna leh Rehabilitation

PRLP surgery hnua dam lehna leh rehabilitation chu a ruh tliak nasat dan leh damlo hriselna zawng zawngah a innghat ang. A tlangpuiin damlote chuan operation hnu kar engemaw zat chhung chu splint emaw cast emaw an vuah a ngai dawn a ni. Kut natna chu chakna leh chetna neih leh theih nan taksa enkawlna a ngai thei bawk.

Tawpna

Proximal radius locking plate hi proximal radius-a fracture enkawlna atana solution tha tak a ni. Surgical technique dik tak leh postoperative care a awm chuan PRLP surgery hian damlote tan result tha tak a pe thei a ni.

FAQs te

Q: PRLP surgery atanga dam leh theih nan eng chen nge hun a duh? 

A: Dam hun chhung chu a ruh tliak nasat dan leh damlo hriselna zawng zawngah a innghat ang. A tlangpuiin a dam kim theih nan kar engemaw zat atanga thla engemaw zat a ngai thei.

Q: Proximal radius-a fracture enkawlna atan non-surgical option a awm em? 

A: A then phei chuan non-surgical options immobilization leh physical therapy te hi proximal radius fracture enkawlna atan a tangkai thei hle.

Q: PRLP surgery hi local anesthesia hmangin tih theih a ni em?

A:Ni e, PRLP surgery hi local anesthesia hmangin tih theih a ni a, mahse hei hi damlo hriselna zawng zawng leh surgery neih nasat danah a innghat ang.

Q: PRLP surgery hlawhtlinna hi engzat nge ni? 

A: PRLP surgery hlawhtlinna hi a tlangpuiin a sang hle a, damlo tam zawk chuan result tha tak tak an tawng a, an hnathawh dan pangngaiah an kir leh thin.

Q: PRLP surgery hi thil hrehawm tak a ni em? 

A: PRLP operation hnuah damlote chuan natna leh hrehawmna engemaw zat an nei thei a, mahse hei hi natna damdawi leh operation hnua enkawlna dik tak hmanga enkawl theih a ni.

Q: PRLP surgery hi kum upa lam, ruh natna vei te tan tih theih a ni em? A: Ni e, PRLP surgery hi ruh natna vei kum upa lam tan pawh tih theih a ni a, mahse surgeon chuan damlo ruh quality leh hriselna zawng zawng a ngaihtuah a ngai dawn a ni.