Plate features .

– LCP proximal radius plates 9 bɛ sɔrɔ ka ɲɛsin proximal radius ka karicogo suguya caman ma .

– platiw bɛ kɛ ka kɔn farikolo ɲɛ .

– Kombi dingɛw bɛ sira Di fixation ma ni locking vises ye threaded section la angulaire sabatili kama, ani cortex vis minnu bɛ dynamic compression unit (DCU) yɔrɔ la ka ɲɛsin distraction ma. A bɛ nafa sɔrɔ koloci-yɔrɔ la min bɛ wele ko kolo walima fɛn caman kari, o yɔrɔ la, laadala juru sanni bɛ tiɲɛ yɔrɔ min na.

– Aw bɛ kolosinsinnan kolosinsinnan kɛ ka ɲɛ .

Fɛn wɛrɛw .

– A dilacogo danma-danma ni 2, 3 ani 4 ye ɲɔgɔn kɔ .

– Dingɛ minnu bɛ tasa kun na , olu bɛ sɔn 2,4 mm locking screws .

– Shaft dingɛw bɛ sɔn milimɛtɛrɛ 2,4 sirilanw na minnu bɛ siri yɔrɔ la walima milimɛtɛrɛ 2,7 kɔrisi ni 2,4 mm Cortex vises distraction portion

– Plate pour le rim rim radiale bɛ sɔrɔ kinin ni numan fɛ ni 5o tilt ye walasa ka bɛn Radial Head anatomy ma .

– Fali minnu bɛ kɛ ka ɲɛsin kunkolo kɔkanna ma, olu bɛ bɛn radiyali gɛrɛgɛrɛ kinin ni numanbolo fila bɛɛ ma .

Kɛrɛnkɛrɛnnenya la .

Produits .	Ref Bamako .	A ɲɛfɔli .	A ka bon kosɛbɛ .	Jayan	Janya
Proximal radius locking plate (u bɛ baara kɛ ni 2.4 locking vis/2.4 cortical vis ye) .	5100-1401 .	3 dingɛw l .	1.8	8.7	53
	5100-1402 .	4 dingɛw l .	1.8	8.7	63
	5100-1403 .	5 dingɛw l .	1.8	8.7	72
	5100-1404 .	3 dingɛw r .	1.8	8.7	53
	5100-1405 .	4 dingɛw r .	1.8	8.7	63
	5100-1406 .	5 dingɛw r .	1.8	8.7	72

Proximal radius locking plate: an ka ɲɛfɔli .

Ni a bɛ tali kɛ proxime radius kariw furakɛli la, da tugulenw ye fura ɲuman ye. Datugulan minnu bɛ kɛ ka caya, olu dɔ ye proximal radius locking plate (PRLP) ye. Nin barokun in kɔnɔ, an bɛna fɛn o fɛn dɔn PRLPw kan, u farikolo yɔrɔw, u taamasiɲɛw, u ka opereli kɛcogo, ani u ka gɛlɛyaw bɛ se ka sɔrɔ olu bɛɛ la.

Anatomie de l'autre proximal de locking plat

PRLP ye plati suguya dɔ ye min bɛ kɛ ka proximal radius kariw furakɛ. O ye nɛgɛdaga ye min bɛ siri ka kɔn, min bɛ siri kɛrɛfɛ-yɔrɔ la. O tasa in dilannen don walasa a ka bɛn kolo cogoya ma, ni dingɛw bɛ kɛ ka juruw don kolo la walasa ka sabatili sɔrɔ.

A suguya ye proximal radius locking plate ye .

PRLP suguya caman bɛ sɔrɔ, i n’a fɔ:

• PRLP tilennen .

• PRLP contouré .

• PRLP prebent .

PRLP min bɛ kɛ ka baara kɛ, o sugandili bɛna bɔ a karicogo kɛrɛnkɛrɛnnen na, banabagatɔ farikolo cogoya la, ani opereli ɲɛnatɔmɔcogo la.

Taamaʃyɛnw bɛ sɔrɔ proximal radius locking plate .

PRLPw bɛ kɛ fɔlɔ ka ɲɛgɛnɛsiralabanaw ka kariw furakɛ. Proximique radius karili bɛ se ka kɛ bɔnɛ ye, i n’a fɔ a binni bolo kɔrɔtalen kan, walima a bɛ sɔrɔ bana dɔ fɛ, i n’a fɔ koloci. PRLP baaracogo jiracogo dɔw ye:

• Kari minnu tɛ bɔ u nɔ na walima minnu tɛ bɔ u nɔ na .

• Kariw minnu bɔra u ka yɔrɔw la .

• karilen minnu bɛ sɔrɔ joginda joginw na .

• kari minnu bɛ kɛ ka ɲɛ .

• Kolotugudaw karili bɛ kɛ banabagatɔw la minnu bɛ kolotugudaw la walima minnu kolo ka ɲi .

Opereli fɛɛrɛ min bɛ kɛ ka ɲɛsin proximal radius locking plate ma .

Opereli fɛɛrɛ min bɛ kɛ PRLP la, o bɛ kɛ ni fɛɛrɛ caman ye:

1. Banabagatɔ jɔyɔrɔ : Banabagatɔ bɛ sigi opereli tabali kan, a ka ca a la a bɛ a yɛrɛ jɔ ni bolokɔni ye bolola tabali kan.

2. Tigɛcogo : tigɛ bɛ kɛ kɛrɛfɛ-yɔrɔ la walasa ka kariyɔrɔ bɔ kɛnɛ kan.

3. Dɔgɔyali : Kari bɛ dɔgɔya ni dɔgɔyali fɛɛrɛw datugulen ye walima ni da wulilen dɔgɔyali fɛɛrɛw ye.

4. Plate placement (Plat bilali): O kɔfɛ, PRLP bɛ bila kɛrɛfɛ-yɔrɔ la, ka a siri a nɔ na ni juruw ye.

5. Dadon: Tigɛda bɛ datugu ani ka fini dɔ kɛ.

Gɛlɛya minnu bɛ se ka sɔrɔ proximal radius locking plate .

I n’a fɔ opereli kɛcogo bɛɛ, gɛlɛya dɔw bɛ se ka sɔrɔ minnu bɛ tali kɛ PRLP tali la. Olu bɛ se ka kɛ:

• Banayɛlɛma

• Union min tɛ tɔn ye walima min bɛ bila kɔfɛ .

• Hardware dɛsɛ .

• Nɛrɛmugu walima jolilabanaw jogin .

• Implant prominence walima dimi .

Segin ni kɛnɛya sabatili .

A kɛnɛyali ni a labɛnni PRLP opereli kɔfɛ, o bɛna bɔ kari juguya la ani banabagatɔ ka kɛnɛya bɛɛ lajɛlen na. A ka ca a la, banabagatɔw bɛna a ɲini ka sɔgɔsɔgɔninjɛ walima ka u fili dɔgɔkun caman kɔnɔ opereli kɔfɛ. Farikoloɲɛnajɛ fana bɛ se ka kɛ wajibi ye walasa ka fanga ni taamacogo segin bolo la min bananen don.

Kuncɛli

Proximal radius locking plates ye fura ɲuman ye min bɛ kɛ ka ɲɛgɛnɛsiralabanaw furakɛ. Ni opereli kɛcogo ɲuman ni opereli kɔfɛ furakɛli bɛ se ka kɛ, PRLP opereli bɛ se ka kɔlɔlɔ ɲumanw di banabagatɔw ma.

Ɲininkaliw jaabiw .

J: A bɛ waati joli ta ka bɔ PRLP opereli la? 

A: A kɛnɛyali waati bɛna bɔ a karilen juguya la ani banabagatɔ ka kɛnɛya bɛɛ lajɛlen na. A ka c’a la, a bɛ se ka dɔgɔkun caman kɛ fo ka se kalo caman ma walasa a ka se ka kɛnɛya ka ɲɛ.

J: Yala sugandili dɔw bɛ yen minnu tɛ opereli ye walasa ka farikolo yɔrɔ dɔw kariw furakɛ wa? 

A: Dɔw la, sugandili minnu tɛ opereli ye i n’a fɔ lamaga-lamagali ni farikoloɲɛnajɛ furakɛli bɛ se ka kɛ sababu ye ka joli-sira-funu-yɔrɔw kariliw furakɛ.

J: Yala PRLP opereli bɛ se ka kɛ sigida la anestezi la wa?

A:Ɔwɔ, PRLP opereli bɛ se ka kɛ sigida la anestezi kɔnɔ, nka o bɛna bɔ banabagatɔ ka kɛnɛya bɛɛ lajɛlen na ani opereli hakɛ la.

J: PRLP opereli ɲɛtaa hakɛ ye mun ye? 

A: PRLP opereli ɲɛtaa hakɛ ka ca, banabagatɔ fanba bɛ sɔrɔ ɲuman sɔrɔ ani ka segin u ka baara kɛcogo la.

J: Yala PRLP opereli ye dimi ye wa? 

A: Banabagatɔw bɛ se ka dimi ni dusukundimi dɔw sɔrɔ PRLP opereli kɔfɛ, nka o bɛ se ka furakɛ ni dimimadafura ye ani opereli kɔfɛ furakɛli ka ɲɛ.

J: Yala PRLP opereli bɛ se ka kɛ banabagatɔ kɔrɔbaw la minnu bɛ koloci la wa? A: Ɔwɔ, PRLP opereli bɛ se ka kɛ banabagatɔ kɔrɔbaw la minnu bɛ koloci la, nka operelikɛla bɛna a ɲini ka banabagatɔ kolo cogoya ni a kɛnɛya bɛɛ lajɛlen jateminɛ.