Dɔgɔtɔrɔso Plaster Saw bɛ kɛ mun na kolotugudaw furakɛli la?

Furakɛcogo sɔgɔlilan ye kolotuguda minɛn kɛrɛnkɛrɛnnen ye min dilannen don walasa ka sɔgɔsɔgɔninjɛ sɔgɔlenw ni kolotugudaw bɔli kɛ cogo la min tɛ mɔgɔ tɔɔrɔ ani ka kɛ cogo ɲuman na .
A tɛ i n’a fɔ tigɛminɛn kɔrɔlenw minnu bɛ wuli ka wuli, pilatiri sɔgɔlan bɛ baara kɛ ni fɛnw ye minnu bɛ wuli ka caya , o b’a to a bɛ se ka fɛn gɛlɛnw tigɛ minnu bɛ kɛ ka fɛnw tigɛ ka sɔrɔ ka dɔ bɔ kosɛbɛ joginni farati la banabagatɔ fari ni a farikolo yɔrɔ nɔgɔlenw na.

Plaster saw ye don o don baarakɛcogo yɔrɔ nafamaba ye:

• Kolow furakɛli baarakɛyɔrɔw

• Trauma ani kɔrɔtɔko yɔrɔw

• Kɛnɛyaso kɔkanna casting dɔgɔtɔrɔsow

• Labɛnni ni tugu-tugu-yɔrɔw

U jɔyɔrɔ tɛ ka sɔgɔsɔgɔninjɛw bɔ dɔrɔn, nka k’o kɛ lafiya la, teliya la, ani tuma bɛɛ , kɛrɛnkɛrɛnnenya la kɛnɛyaso sigidaw la minnu hakɛ ka ca.

Orthopédique Plaster Saw ka baarakɛcogo kɛnɛyaso la

Cast bɔli karilen kɛnɛyali kɔfɛ walima furakɛli ladilanni kɔfɛ

Kari kɛnɛyalen kɔfɛ walima tuguni jateminɛ senfɛ, pilatiri sɔgɔlenw ka kan ka bɔ ka ɲɛ ani ka a kɛ cogo la min tɛ mɔgɔ tɔɔrɔ.
Bololabaarakɛla ŋana dɔ bɛ se ka tigɛli kɛ ni bɔgɔdaga ye , o b’a to dɔgɔtɔrɔw bɛ se ka fɛnw bɔ minnu bɛ u lamaga, k’a sɔrɔ u ma banabagatɔ dusu saalo walima u ka lakana tiɲɛ.

Fibreglasi ni Sintetiki kolotugudaw bɔli

Bi kolotugudaw furakɛli bɛ ka caya ka baara kɛ ni fibreglasi nɔgɔmanw ye ani fɛn dilannenw ye minnu bɛ kɛ ka fɛnw kɛ, minnu bɛ kɛ ni fɛn dilannenw ye, .
minnu bɛ kɛ ka furakɛli kɛ, o dilannen don walasa ka tigɛcogo sabatilen mara fɛn dilannenw janya ni fɛnw hakɛ danfaralenw na , ka a to a ka kɛ sababu ye ka nɔ bɔlenw sɔrɔ don o don kɛnɛyaso baarakɛcogo la.

Aw bɛ baara kɛ ni a ye kɔrɔtɔko ni kɛnɛyaso kɔkanna kolotugudaw la

Kɔrɔtɔko yɔrɔw la ani kɛnɛyaso kɔkan, a ka ca a la, a ka kan ka bɔgɔdaga bɔ joona.
Plaster saws support efficient patient turnover , ka dɔgɔtɔrɔso baarakɛlaw dɛmɛ ka dɔ bɔ makɔnɔni waatiw la ka sɔrɔ ka taabolo lakanani sabati.

Dɔgɔtɔrɔso baarakɛlaw ka Plaster Saw ka dilancogo kolomaw

Fɛɛrɛ min bɛ wele ko High-Frequency Oscillation Technology ka banabagatɔw lakana

Plaster saw bɛ baara kɛ ni bɔgɔlan lamagacogo ye min bɛ lamaga sanni ka wuli ka taa a fɛ .
Nin dilancogo in b’a to fɛn gɛlɛnw bɛ se ka tigɛ ka sɔrɔ farikolo yɔrɔ nɔgɔlenw bɛ taa ni nɛgɛ ye, o bɛ fari sɔgɔli farati dɔgɔya kosɛbɛ bɔgɔdaga bɔli waati.

Bololabaarakɛminɛn min bɛ kɛ ni ergonomi ye, o bɛ kɛ ka segin-ka-bɔnye kɛ kɛnɛyaso la

O minɛn in bɛ ni bololafɛn ye min dilannen don cogo la min bɛ se ka kɛ , o b’a to a bɛ se ka minɛ cogo la min bɛ mɔgɔ lafiya siɲɛ caman kɛcogo la.
O bɛ dɛmɛ don ka baarakɛlaw ka sɛgɛn dɔgɔya ani ka a kunbɛncogo ɲɛ, kɛrɛnkɛrɛnnenya la kolotugudaw la minnu bolo degunnen don.

Motɛri baarakɛcogo sabatilen walasa ka dannaya kɛ waati jan kɔnɔ

A durable motor system provides consistent oscillation output , ka dɛmɛ don baarakɛcogo jan na ani baarakɛcogo dafalen hali ni a bɛ baara kɛ ni a ye tuma caman na don o don.

Blade Compatibilité ani Tigɛcogo

A bɛ bɛn ni Standard Medical Plaster Saw Blades ye

Plaster saw bɛ bɛn ni standard plaster saw blades ye , o b’a to dɔgɔtɔrɔsow ni feerekɛlaw bɛ se ka fɛnw sɔrɔ sigida la k’a sɔrɔ u ma u jigi da blade systems propriétaires kan.

Tigɛcogo ɲuman min bɛ kɛ ka ɲɛsin Plaster ni Fibreglas Casts ma

Blade oscillation frequency and amplitude bɛ ɲɛnabɔ ka ɲɛ walasa ka tigɛ teliya, saniyalen sɔrɔ plaster ni synthetic casts fila bɛɛ fɛ , ka dɔ bɔ taabolo bɛɛ waati la ani ka baarakɛcogo ɲuman ɲɛ.

Lakanali jateminɛw kolotugudaw bɔli la

Farati bɛ dɔgɔya farikolo yɔrɔ nɔgɔlenw joginni na

Lamini min bɛ wuli ka wuli, o bɛ fari tigɛcogo kasaara dɔgɔya kosɛbɛ ni i y’a suma ni baarakɛminɛnw ye minnu bɛ wuli ka wuli, o b’a to minɛn in bɛnnen don ka baara kɛ ni banabagatɔ caman ye.

Funteni sɔrɔli min bɛ kɔrɔsi a tali waati jan kɔnɔ

O fɛɛrɛ in dabɔra walasa ka funteni camanba dɔgɔya furakɛli kuntaalajanw senfɛ, o bɛ dɛmɛ ka funteni dusu tiɲɛ ani ka banabagatɔ lakanani sabati bɔgɔdaga bɔli waati.

Dɔgɔtɔrɔso yɔrɔw bɛnkan ni baarakɛcogo sigidaw

A bɛnnen don dɔgɔtɔrɔsow, dɔgɔtɔrɔsow ani kɛnɛyasow ma

Nin furakɛli plastiki sɔgɔlan in dabɔra ka baara kɛ ni a ye:

• Foroba dɔgɔtɔrɔsow ni dankan dɔgɔtɔrɔsow

• Kolow furakɛli yɔrɔ kɛrɛnkɛrɛnnenw

• Trauma ni kɔrɔtɔko baarakɛyɔrɔw

• Labɛnni ni tugu-tugu-yɔrɔw

A ka baarakɛcogo caman b’a kɛ minɛn jɔnjɔn ye kolotugudaw ladonni yɔrɔ caman na.

A ladilanna kolotugudaw ka baarakɛyɔrɔw kama minnu ka baara ka ca

Baarakɛcogo sabatili, baara nɔgɔya, ani ladonniko dɔgɔyali, o b’a to minɛn in bɛnnen don kosɛbɛ don o don furakɛli la min bɛ kɛ siɲɛ caman.

OEM, ODM, ani Bulk Supply Sugandili minnu bɛ kɛ furakɛli feerelaw ye

OEM Branding ani Privé Label Solutions

OEM ni ODM baarakɛminɛnw bɛ sɔrɔ, i n’a fɔ mɔgɔ kelen-kelen ka taamasiyɛnw, pakew labɛncogo, ani fɛɛrɛko labɛnni ka da mara suguya ɲininiw kan.

Dɛmɛ min bɛ kɛ marabolow ka tilali ni dɔgɔtɔrɔso sanniko la

Plaster saw bɛ se ka dilan feerekɛlaw ka rezow kama, dɔgɔtɔrɔsow ka tenderiw kama, ani sannifeere porozɛw kuntaalajanw kama , ni jogoɲini sabatili ye ani dilan seko sabatilen.

Jogoɲumanya ɲɛnabɔli ani sariyasunba dɛmɛni

Fɛn dilanni ISO-Compliant Quality Systems kɔnɔ

Plaster saw bɛɛ bɛ dilan ni jogoɲumanya sabatili fɛɛrɛ gɛlɛnw ye , minnu bɛ a to fɛn dilannenw ka kɛ kelen ye, u ka mɛn, ani u bɛ se ka da u kan kɛnɛyaso la.

Sɛbɛnw dɛmɛni diɲɛ suguyaw kama

Fɛɛrɛsɛbɛnw ni jogoɲumanya sɛbɛnw bɛ se ka di walasa ka marabolow tɔgɔ sɛbɛnni, tender dicogo, ani sariya labatoli taabolo dɛmɛ suguw la.

Mun na i bɛ CZMEDITECH sugandi ka kɛ i ka Plaster Saw feerela ye?

CZMEDITECH bɛ kolotugudaw ka baarakɛyɔrɔ dɔnniya, fɛn dilanni seko sabatilen, ani diɲɛ OEM dɛmɛ fara ɲɔgɔn kan walasa ka furakɛli minɛnw lase diɲɛ jɛɲɔgɔnw ma minnu bɛ se ka da u kan.

An ka plaster saw furaw dilannen don walasa ka ninnu kunbɛn:

• Dɔgɔtɔrɔso lakanani jigiyaw

• Jagokɛlaw ka sannifeere sariyaw

• Dɔgɔtɔrɔso baarakɛcogo kuntaalajan wajibiyalenw

An bɛ jɛɲɔgɔnw dɛmɛ minnu bɛ jogo ɲuman ɲini, min bɛ se ka sɛgɛsɛgɛ, ani baarakɛlaw ka jɛkafɔ fɛɛrɛko siratigɛ la.

Ɲininkali minnu bɛ kɛ tuma caman na furakɛli plastiki sɔgɔlanw kan

Yala furakɛli plastiki sɔgɔlen farati tɛ banabagatɔw ma wa?

Awɔ. Dɔgɔtɔrɔso plastiki sɔgɔlanw bɛ baara kɛ ni jiginni fɛɛrɛ ye min dabɔra ka fɛn gɛlɛnw tigɛ minnu dilannen don ka sɔrɔ ka fari ni farikolo yɔrɔ nɔgɔlenw joginni farati dɔgɔya.

Yala nin plastiki sɔgɔlan in bɛ se ka kɛ fibreglasi sɔgɔlenw ye wa?

Awɔ. O minɛn in bɛnnen don laadala plastiki sɔgɔlenw ni bi fibreglasi walima kolotugudaw sɔgɔli sintetiki fila bɛɛ ma.

Yala OEM walima privé labeling bɛ sɔrɔ wa?

Awɔ. OEM ni privé label suganditaw bɛ sɔrɔ feerelikɛlaw ni jɛɲɔgɔnw fɛ ka da komandi hakɛ kan ani sugu magow kan.

Dɔgɔtɔrɔso jumɛnw de ka teli ka baara kɛ ni plastiki sɔgɔlanw ye?

Dɔgɔtɔrɔsow, kolotugudaw, kɛnɛyaso kɔrɔtɔlenw ani kɛnɛyaso minnu bɛ kɛnɛyaso la, olu ka teli ka baara kɛ ni plastiki sɔgɔlanw ye, i n’a fɔ kolotugudaw ladonni kɛcogo kɔrɔ dɔ.

Tɔ̀gɔ
Fɛrɛnkan min bɛ wuli ka wuli	≥12500’/min
Donna fanga	110Vac -240Vac.50Hz ye a ka baara ye
teliya	1-6
Saw Blade ye	2pc

Opereli Plaster Saw: Baarakɛminɛn nafamaba don kolotugudaw operelikɛlaw bolo

A ka ca a la, kolotugudaw opereli bɛ kɛ ni pilatiri dɔ bɔli ye min kɛra ka bolokɔni walima kolotuguda dɔ lamaga kari walima opereli kɔfɛ. Cast bɔli ye fɛɛrɛ nɔgɔlen ye min bɛ baarakɛminɛn kɛrɛnkɛrɛnnen dɔ de wajibiya min bɛ wele ko opereli plastiki sɔgɔlan. Nin barokun in kɔnɔ, an bɛna kuma opereli plastiki sɔgɔlenw nafa kan, u dilanni, u baaracogo, ani u nafa banabagatɔw ni operelikɛlaw ma.

Opereli Plaster Saw ye mun ye?

Opereli plaster saw ye furakɛli minɛn ye min bɛ bolo la, kolotugudaw operelikɛlaw bɛ min kɛ walasa ka plaster sɔgɔlenw bɔ banabagatɔ fari la. O ye baarakɛminɛn nafama ye kolotugudaw opereli la, wa a bɛ kɛ ka pilatiri sɔgɔlen tigɛ k’a sɔrɔ a ma kojugu kɛ banabagatɔ fari la. Opereli plastiki sɔgɔlanw dilannen don ni fɛnw ye minnu ka ɲi kosɛbɛ, minnu bɛ mɛn ani minnu bɛ mɛn. U dilannen don ni nɛgɛbere ye min ɲɔgɔn tɛ, o b’a to u bɛ se ka plastiki sɔgɔlen tigɛ ka sɔrɔ ka joginni farati dɔgɔya banabagatɔ la.

Opereli Plaster Saw suguyaw

Opereli plastiki sɔgɔlan suguya caman bɛ sɔrɔ sugu la, wa u dilanni, u cogoya ani u bonya tɛ kelen ye. Plaster sɔgɔlan suguya minnu ka teli ka kɛ, olu ye kuran ni fiɲɛ ye.

Kuran Plaster Saws

Kuran plastiki sɔgɔlanw bɛ baara kɛ ni kuran ye, wa motɛri bɛ u la min bɛ nɛgɛbere boli. U baara ka nɔgɔn, u bɛ baara kɛ ka ɲɛ, wa u tɛ mankan ni yɛrɛyɛrɛ dɔɔnin bɔ baara kɛtuma na. Kuran plastiki sɔgɔlanw de ka di operelikɛla fanba ye barisa u bɛ se ka u yɛrɛ kɔlɔsi ani ka u kɛ ka ɲɛ tigɛ waati la.

Pneumatique Plaster Saws (Sɛgɛsɛgɛlikɛlanw) minnu bɛ kɛ ni fiɲɛ ye

Plaster sɔgɔlanw minnu bɛ fiɲɛ bila, olu bɛ baara kɛ ni fiɲɛ degunnen ye, wa u bɛ ni nɛgɛ ye min bɛ taa ɲɛfɛ ka segin kɔfɛ ni ɲɔgɔn ye. U girinya ka nɔgɔn, u ka surun, wa u mankan ni u yɛrɛyɛrɛ hakɛ man ca. Plaster sɔgɔlanw minnu bɛ fiɲɛ bila, olu ka ɲi kosɛbɛ walasa ka baara kɛ ni u ye kɔrɔtɔko la walima ni kuran tɛ sɔrɔ nɔgɔya la.

Opereli Plaster Saw dilanni n’a yɔrɔw

Opereli plastiki sɔgɔlan dilannen don walasa ka pilatiri sɔgɔlen tigɛ k’a sɔrɔ a ma fari duguma walima farikolo yɔrɔ nɔgɔlen tiɲɛ. A bɛ ni bɔgɔlan ye min ɲɔgɔn tɛ, min dilannen don walasa ka plastiki gɛlɛnw tigɛ ka sɔrɔ ka joginni farati dɔgɔya banabagatɔ la. O bɔgɔlan dilannen don ni nɛgɛ ye min tɛ sɔgɔ, min ka ɲi kosɛbɛ, min bɛ mɛn ani min bɛ mɛn.

Plastiri sɔgɔlan bolo dabɔra walasa ka operelikɛla minɛ ka ɲɛ ani ka a minɛ cogo la min bɛ se ka kɛ a tigɛtuma na. Bolo dilannen don ni fɛnw ye minnu tɛ sɔgɔsɔgɔ, minnu bɛ a to a ka minɛ ka ɲɛ, hali ni operelikɛla bolow ɲiginnen don walima ni u bɛ sɛgɛn.

Opereli Plaster Saw bɛ baara kɛ cogo di?

Opereli plastiki sɔgɔlanw bɛ baara kɛ ni pilatiri sɔgɔlen fɛn tigɛlen ye k’a sɔrɔ u ma tiɲɛni kɛ fari duguma walima farikolo yɔrɔ nɔgɔlen na. Plaster sɔgɔlan bɔgɔlan bɛ taa ɲɛfɛ ka segin kɔfɛ, o min b’a to a bɛ se ka plaster fɛn gɛlɛn tigɛ. Operelikɛla de bɛ nɛgɛso lamagacogo ɲɛnabɔ, o min bɛ sɔgɔsɔgɔninjɛ bolo minɛ ka nɛgɛ bilasira tigɛyɔrɔ sira fɛ.

Plaster saw bɛ funteni dɔɔni bɔ a tigɛtuma na, o b’a to banabagatɔ bɛ lafiya ani a tɛ dimi walima a dusu tiɲɛ. Sɔgɔsɔgɔninjɛ fana tɛ buguri walima nɔgɔ caman bɔ, o b’a to opereli yɔrɔ ka saniya ani ka saniya.

Nafa minnu bɛ sɔrɔ opereli Plaster Saw la

Opereli plastiki sɔgɔlenw nafa ka bon banabagatɔw ni operelikɛlaw ma. U bɛ tiɲɛni ni kɔrɔsili hakɛ caman di tigɛcogo la, o min b’a to banabagatɔ fari ni a farikolo yɔrɔ nɔgɔlenw tɛ kojugu kɛ. Sɔgɔsɔgɔninjɛ fana tɛ mankan ni yɛrɛyɛrɛ dɔɔni bɔ, o min b’a to banabagatɔ bɛ lafiya ani a tɛ dimi walima a dusu tiɲɛ. Opereli plastiki sɔgɔlanw fana bɛ waati ni nafolo bɔ dɔgɔtɔrɔso la. U bɛ kɛ sababu ye ka plastiki sɔgɔlenw bɔ joona ani ka ɲɛ, o min b’a to banabagatɔw bɛ se ka u ka baara kɛcogo kɔrɔw daminɛ joona. O bɛ dɔ bɔ dɔgɔtɔrɔso ladonni janya la ani ka nafolo kisi min bɛ se ka kɛ

ka di banabagatɔ wɛrɛw ma minnu mago bɛ dɛmɛ na.

Fɛɛrɛw ni Lakanali fɛɛrɛw

A ka ca a la, opereli plastiki sɔgɔlanw tali farati tɛ, nka fɛɛrɛ damadɔ bɛ yen operelikɛlaw ka kan ka minnu tigɛ walasa k’u ka banabagatɔw lakana. A fɔlɔ, sɔgɔsɔgɔninjɛ sɔgɔlan ka kan ka to ka nɔgɔya ani ka kɛ cogo ɲuman na walasa sɔgɔlan kana siri walima ka minɛ pilatiri fɛn na. Filanan, operelikɛlaw ka kan k’u janto u kana degun walima fanga caman kɛ tigɛtuma na, barisa o bɛ se ka jogin bila banabagatɔ fari la walima a farikolo yɔrɔ nɔgɔlenw na.

A laban na, operelikɛlaw ka kan k’a lajɛ ni yeelen ni yecogo ɲuman bɛ u la tigɛtuma na, barisa o bɛ se ka dɛmɛ don ka banabagatɔ bali ka jogin kasaara la. A nafa ka bon fana ka a dilabaga ka laadilikanw labato, min bɛ tali kɛ pilatiri sɔgɔlen baaracogo n’a ladonni na walasa ka a lakana ani ka a baara cogo ɲuman na.

Kuncɛli

Opereli plastiki sɔgɔlanw ye baarakɛminɛn nafamaba ye kolotugudaw operelikɛlaw bolo, pilatiri sɔgɔlenw bɔli senfɛ banabagatɔw la. U bɛ tiɲɛni ni kɔrɔsili hakɛ caman di tigɛcogo la, o min b’a to banabagatɔ fari ni a farikolo yɔrɔ nɔgɔlenw tɛ kojugu kɛ. U bɛ waati ni nafolo fana bɔ dɔgɔtɔrɔso la ani ka a to banabagatɔw ka se ka u ka baara kɛcogo kɔrɔw daminɛ joona.

A nafa ka bon operelikɛlaw ka u yɛrɛ tanga ani ka lakana fɛɛrɛw tigɛ ni u bɛ baara kɛ ni pilatiri sɔgɔlan ye walasa k’u ka banabagatɔw lakana. Ni operelikɛlaw ye a dilabaga ka laadilikanw labato a baaracogo n’a ladoncogo kan, u bɛ se ka a lajɛ ko a bɛ se ka kɛ sababu ye ka pilatiri sɔgɔlen lakana ani ka a baara cogo ɲuman na.

Ɲininkaliw minnu bɛ kɛ

1. Yala opereli plastiki sɔgɔlen kɛli bɛ dimi wa?

• Ayi, opereli plastiki sɔgɔlanw bɛ funteni ni yɛrɛyɛrɛ dɔɔnin dɔrɔn de lase a ma, o b’a to banabagatɔ bɛ lafiya ani a tɛ dimi walima dusukasi si sɔrɔ a tigɛtuma na.

1. Yala mɔgɔ dɔ bɛ se ka baara kɛ ni opereli plastiki sɔgɔlan ye wa?

• Ayi, kolotugudaw operelikɛla minnu degecogo don ani minnu bɛ se kosɛbɛ, olu dɔrɔn de ka kan ka opereli kɛ ni sɔgɔlilan ye walasa ka banabagatɔ lakanani ni a ka kɛnɛya sabati.

1. A bɛ waati joli ta ka plastiki sɔgɔlen bɔ ni opereli plastiki sɔgɔlan ye?

• Waati min bɛ ta ka sɔgɔsɔgɔninjɛ bɔ ni opereli sɔgɔlilan ye, o bɛ bɔ fɛn dilannen bonya n’a girinya la. Ni a kɛra cogo o cogo, a bɛ miniti 10-20 ɲɔgɔn ta ka plastiki sɔgɔlen bɔ ni pilatiri sɔgɔlan ye.

1. Yala farati bɛ banabagatɔ jogin na tigɛtuma na wa?

• Joginni farati ka dɔgɔn banabagatɔ la tigɛtuma na ni operelikɛla ye fɛɛrɛ ɲumanw tigɛ ani ka a tanga.

1. Yala fɛɛrɛ wɛrɛw bɛ yen minnu bɛ se ka kɛ ka tɛmɛ opereli plastiki sɔgɔlan kan wa?

• Fɛɛrɛ wɛrɛ dɔw bɛ yen minnu bɛ se ka kɛ ka plastiki sɔgɔlen bɔ, i n’a fɔ ka baara kɛ ni bɔgɔdaga tigɛlan ye walima ni bɔgɔlan ye. Nka, opereli kɛli ni pilatiri sɔgɔlanw ye, o ye fɛɛrɛ ye min bɛ se ka kɛ ka ɲɛ ani min bɛ kɛ ka ɲɛ, min bɛ kɛ ka plastiki sɔgɔlenw bɔ.