Reciprocating Saw .

A ɲɛfɔli .		Congifuration standard .
Voltage donna .	110V-220V .	Bololabaarakɛlaw .	1pc .
Batiri ka voltage .	14.4V .	Charger .	1pc .
Batiri seko ni dɔnko .	Wajibi tɛ	Batiri	2pcs .
Reciprocating frequency .	14000000000000 .	Aseptic Battery transfert ring .	2pcs .
Funteni sterilize .	135°C .	Saw Blades .	3pc .
Amplitude reciprocating .	2,5mm-5mm .	Wrench .	1pc .
		Aluminiyɔmu kɛsu .	1pc .

Opereli Reciprocating Saw: Gafe min bɛ kɛ ka mɔgɔw bɛɛ lajɛlen lajɛ .

Opereli diɲɛ kɔnɔ, a nafa ka bon kosɛbɛ ani a bɛ tiɲɛ kosɛbɛ. Opereli min bɛ kɛ ka ɲɔgɔn sɔrɔ, o ye baarakɛminɛn nafamaba ye operelikɛla ka marifakisɛw la, min bɛ se ka kolo ni farikolo yɔrɔw tigɛ tigitigi. Nin gafe bɛɛ kɔnɔ, an bɛna fɛn o fɛn dɔn, o bɛɛ bɛna kɛ ka ɲɛsin opereli ma min bɛ se ka kɛ sababu ye ka opereli kɛ, k’a ta u tariku n’u jiginni na, ka se u ka bi baarakɛcogo n’u baarakɛcogo ma.

1. Opereli jaabi bɛ mun kɛ?

Opereli min bɛ kɛ ka ɲɔgɔn jaabi, o ye bololafɛn ye min bɛ kɛ ka kolo ni farikolo tigɛ opereli senfɛ. A bɛ baara Kɛ ni lamaga-lamagali ye min bɛ ɲɔgɔn Sɔrɔ, o kɔrɔ ye ko jiribolo bɛ Taa ɲɛfɛ ka Taa teliya la lamaga-lamagali siratigɛ la. O lamaga in bɛ sira Di tigɛcogo tigitigi ni kɔrɔsilen ma, o bɛ kɛ sababu ye ka SWE kɛ baarakɛminɛn nafamaba ye opereli caman na.

2. Opereli min bɛ tali kɛ ɲɔgɔn na, o tariku ni a jiginni .

Sɔgɔsɔgɔninjɛ in bɔyɔrɔ bɛ se ka bɔ san kɛmɛ 19nan laban na, n’a daminɛna ka kɛ nɛgɛ tigɛcogo baarakɛminɛn ye. San kɛmɛ 20nan daminɛ na, o ɲɔgɔnna swod (sɔgɔli) in bɛrɛbɛnna walasa ka baara kɛ ni a ye opereli la, yɔrɔ min na a kɛra baarakɛminɛn ye min diyara mɔgɔw ye joona k’a sababu kɛ a ka ɲɛfɔli jɛlen n’a ka fɛn caman kɛli ye.

Sanw kɔnɔna na, opereli reciprocating saw dilanni jiginna walasa ka operelikɛlaw magoɲɛfɛnw caman ɲɔgɔnna caman ɲɛnabɔ. Bi sɔgɔlanw ka nɔgɔn ani u bɛ se ka kɛ fɛn ye, u bɛ kɛ ni nɛgɛw nɔrɔli suguya caman ye minnu bɛ se ka tigɛ tigitigi kɛ opereli suguya caman na.

3. Opereli min bɛ kɛ ka ɲɔgɔn jaabi, o yɔrɔw .

Opereli (Sɔgɔsɔgɔli) min bɛ kɛ ni opereli ye, o bɛ kɛ fɛn caman ye, i n’a fɔ:

• Bololabaarakɛminɛn min bɛ bolo la ni motɛri ye min bɛ sɔgɔlan boli .

• sɔgɔlan dɔ, min bɛ siri baarakɛminɛn laban na ka taa ɲɛfɛ ka segin teliya la walasa ka kolo ni farikolo tigɛ .

• kuran juru walima batiri min bɛ fanga di baarakɛminɛn ma .

• Contrôle switch min bɛ kɛ sababu ye ka operelikɛla bila ka baarakɛminɛn da ani ka a faga ani ka a ka nɛgɛ teliya ladilan .

4. Opereli suguya minnu bɛ ɲɔgɔn sɔrɔ ɲɔgɔn fɛ .

Opereli-sɔgɔsɔgɔ suguya damadɔ bɛ yen, u kelen-kelen bɛɛ n’u ka fɛnw n’u ka nafaw tɛ kelen ye. A suguya dɔw ye:

• Saw minnu bɛ kɛ ka furakɛli kɛ ɲɔgɔn fɛ, olu bɛ kɛ ka caya: Nin jirisunw de bɛ kɛ ka caya, wa u bɛnnen don opereli suguya caman ma.

• Sɔgɔsɔgɔlan minnu bɛ wuli: O jirisunw bɛ ni nɛgɛ ye min bɛ lamaga lamaga-lamagali la, o bɛ kɛ sababu ye ka kolo gɛlɛn walima kolo gɛlɛn tigɛ.

• Sagittal saws (sagittal saws): O jirisunw bɛ ni nɛgɛ ye min bɛ taa ɲɛfɛ ka segin sira tilennen na, wa a ka ɲi kosɛbɛ farikolo yɔrɔ nɔgɔlenw ni kolow tigɛcogo la.

5. opereli minnu bɛ kɛ ka ɲɔgɔn sɔrɔ ɲɔgɔn fɛ .

Opereliw bɛ kɛ ka ɲɔgɔn sɔrɔ opereli suguya caman na, i n’a fɔ:

• Opereli minnu bɛ kɛ ni kolotugudaw ye: Nin opereli ninnu bɛ kɛ ni kolo ni kolotugudaw dilancogo ye walima u falenni ye, ani opereli minnu bɛ kɛ ni opereli ye, olu bɛ kɛ ka kolo yɔrɔ tiɲɛnenw bɔ.

• Neurosurgery: Opereli reciprocating saw bɛ se ka kɛ ka kolotugudaw bɔ kunsɛmɛ opereli senfɛ.

• Opereli plastiki la:Sɔgɔsɔgɔninjɛ minnu bɛ se ka kɛ opereli ye, olu bɛ se ka kɛ ka kolo walima farikolo yɔrɔ dɔw bɔ u la i n’a fɔ ɲɛda labɛncogo kura walima sinji labɛncogo kura.

• Opereli bɛɛ lajɛlen: Opereli min bɛ kɛ ka banaw kunbɛn, o bɛ se ka kɛ ka kolotugudaw bɔ a la fɛɛrɛw senfɛ i n’a fɔ a tigɛcogo walima a tumuw bɔli.

6. Opereli min bɛ kɛ ka mɔgɔw jaabi, o nafa ni a dɛsɛ .

I n’a fɔ opereli minɛn tɔw bɛɛ, opereli minnu bɛ kɛ ka ɲɔgɔn jaabi, olu nafa n’u dɛsɛ bɛ u la. Opereli-sɔgɔli-sɔgɔlan nafa dɔw ye ninnu ye:

• Tiɲɛni: Saw ka bɔgɔdaga lamagacogo min bɛ ɲɔgɔn sɔrɔ, o bɛ sira di tigɛcogo tigitigi ma ani a kɔlɔsili ma.

• Fɛn caman kɛli: opereli minnu bɛ kɛ ka ɲɔgɔn sɔrɔ, olu bɛ se ka kɛ opereli suguya caman na.

• Teliya: A bɛ kɛ ni kɔ-ni-kɔ lamaga teliya ye, o bɛ a to tigɛ teliya.

  
  

Opereli-sɔgɔli-sɔgɔli-sɔgɔli nafa dɔw ye ninnu ye:

• Mankan ni yɛrɛyɛrɛ: Sɔgɔsɔgɔninjɛ teliyaba bɛ se ka mankan ni yɛrɛyɛrɛ lase mɔgɔ ma, o bɛ se ka kɛ sababu ye ka operelikɛla ni banabagatɔ ma diya.

• Joginni farati: Saw ka sɔgɔli teliya bɛ se ka kɛ sababu ye ka a lamini farikolo yɔrɔ jogin ni a ma kɛ ka ɲɛ.

• Ladonni: Opereli reciprocating saw bɛ ladonni kɛ tuma bɛɛ walasa u ka baara kɛ ka ɲɛ.

7. Lakanali fɛɛrɛw Ni aw bɛ baara kɛ ni opereli kɛcogo ye .

I n’a fɔ opereli minɛn o baarakɛminɛn, lakana fɛɛrɛ caman bɛ yen minnu ka kan ka tigɛ ni opereli bɛ kɛ ni sɛgɛsɛgɛlikɛlan ye. O fɛɛrɛ dɔw ye:

• Degeli ɲuman : Operelikɛlaw ni dɔgɔtɔrɔ wɛrɛw ka kan ka kalan ɲuman sɔrɔ opereli kɛcogo la min bɛ kɛ ni opereli ye, sani u ka baara kɛ ni u ye opereli kɛcogo la.

• Baara kɛli ni lakanani minɛnw ye: Operelikɛlaw ni dɔgɔtɔrɔso baarakɛla wɛrɛw ka kan ka u tangalanw don, i n’a fɔ bolokɔniw ni ɲɛ tangali, ni aw bɛ baara kɛ ni opereli ye min bɛ kɛ ni opereli ye.

• Stérilisation ɲuman: Opereli reciprocating saw ka kan ka sterilize ka ɲɛ sani a ka kɛ ani a kɛlen kɔ ka a kɛ ka a bali ka bana sɔrɔ.

8. Opereli min bɛ se ka kɛ ka mɔgɔw jaabi, o ladonni ni a saniya .

Walasa ka a jira ko opereli min bɛ kɛ ka ɲɔgɔn sɔrɔ, o bɛ baara kɛ ka ɲɛ, a nafa ka bon ka to ka a ladon ani ka a saniya. Ladilikan dɔw minnu bɛ ta ka ɲɛsin ladonni ni saniya ma, olu dɔw ye:

• Aw bɛ to ka sɛgɛsɛgɛli kɛ ni a tiɲɛna walima ni a tiɲɛna.

• Aw bɛ sɔgɔlilan ni yɔrɔ wɛrɛw kɛ minnu bɛ lamaga tuma bɛɛ, aw bɛ tulu kɛ olu la.

• Aw bɛ sɔgɔlilan ni yɔrɔ wɛrɛw saniya ka ɲɛ u kelen kelen bɛɛ kɔfɛ.

9. Opereliw ni ɲɔgɔn cɛ sɛgɛnw nataw .

Ni fɛɛrɛ kuraw bɛ ka wuli ka taa ɲɛ, a ka c’a la, opereli minnu bɛ kɛ ni opereli ye, olu bɛna kɛ fɛn ye min bɛ se ka kɛ ka ɲɛ ani ka kɛ fɛn caman ye. Ɲɛtaa dɔw minnu bɛ se ka ye don nataw la, olu dɔw ye:

• Blade fɛɛrɛ ɲɛnabɔlen min bɛ sira di tigɛcogo tigitigi ma.

• Integration ni opereli baarakɛminɛn wɛrɛw ni fɛɛrɛ wɛrɛw ye, i n’a fɔ robotiki ani 3D ja.

• Saw minnu tɛ fili walima minnu tɛ ni juru ye, olu yiriwali minnu bɛ fɛn caman sɛgɛsɛgɛ ani ka taa-ka-segin kɛ opereli yɔrɔ la.

10. Kuncɛli .

Kuncɛli la, opereli min bɛ kɛ ka mɔgɔw jaabi, o ye baarakɛminɛn nafamaba ye opereli diɲɛ kɔnɔ. A tigitigi ni a caman kɛli b’a kɛ baarakɛminɛn nafamaba ye opereli suguya caman na. Hali n’a nafa n’a dɛsɛ bɛ a la, ni a degecogo ɲuman n’a ladoncogo bɛ a la, opereli min bɛ kɛ ka furakɛli kɛ, o ye baarakɛminɛn ye min tɛ mɔgɔ tɔɔrɔ ani min bɛ se ka kɛ, min bɛna to ka jɔyɔrɔba ta opereli la san nataw kɔnɔ.

11. Ɲininkaliw jaabiw .

1. Yala opereli min bɛ kɛ ka mɔgɔw jaabi, o bɛ se ka baara kɛ ni a ye wa?

• Ɔwɔ, opereli minnu bɛ kɛ ni opereli ye, olu tɛ se ka kɛ ni u bɛ baara kɛ ka ɲɛ ani ni u degecogo ɲuman ni u lakanani minɛnw bɛ u la.

1. Opereli kɛcogo sugu jumɛnw de bɛ kɛ ni saw ye minnu bɛ ɲɔgɔn jaabi?

• Opereli bɛ se ka kɛ opereli suguya caman na, i n’a fɔ kolotugudaw opereli, hakiliɲagami, opereli plastiki, ani opereli bɛɛ.

1. Opereli jaabi ka kan ka saniya ani ka mara siɲɛ joli?

• opereli minnu bɛ kɛ ka ɲɔgɔn jaabi, olu ka kan ka kɛ .